5Vdc powered, 1-channel, mains rated solid state relay (SSR) module with HIGH level trigger input. The relay is rated to switch AC voltages only from 100-240V and up to 2 Amps maximum current.
This HIGH level trigger version activates the relay when the trigger voltage is 3.3 - 5.0Vdc and turns off when trigger voltage is 0 - 2.5Vdc.
Relay active indicator LED.
Note: that this module can ONLY SWITCH AC CURRENTS, up to a maximum of 2 A, with a maximum voltage of 240 V AC. Trying to use this module to switch DC loads or exceeding the specified limits can damage the module and/or your connected devices!
See order code QMA851L for a low level version of this product.
Specifications| Supply Voltage: | |
| Supply voltage (nominal) | 5V dc (DC+, DC-) |
| Supply voltage range | 4 - 6V dc |
| Trigger Input Signal: | |
| Trigger voltage | 3.3V - 5.0V dc (CH1) |
| Release voltage | 0V - 2.5V dc (CH1) |
| Current (relay active) | 3.8 mA |
| Output Rating: | |
| Output Type | 1 x G3MB-202P solid state relay |
| Output Connections | A1, B1 |
| Maximum Output Load (Resistive) | 100 - 240Vac @ 2 Amps max. per relay |
| Life | 10 million operations |
| Relay Characteristics: | |
| Operating time | 1/2 of load power source cycle + 1ms max. |
| Release time | 1/2 of load power source cycle + 1ms max. |
| Leakage current | 1mA max. at 100VAC, 1.5mA max. at 200VAC |
| Non-repetitive Peak Surge | 30A |
| Insulation Resistance | 1,000m Ohm min. @ 500Vdc |
| Dielectric Strength | 2500Vac 50/60HZ (1 minute); 3750Vac 50/60HZ (1 second) |
| Module Characteristics: | |
| Overall dimensions (mm) | ~ 25.0W x 34.5L x 23.5H |
| Fixing Holes | 4 x M3 |
| Enclosure | WCAH2855 |
| Board Connections | Screw terminal blocks |
| Product Format | PRE-ASSEMBLED Electronic Module Format Product Formats Info |
| Documentation | User Manual - coming soon |
