Programmable 24 Hour lighting controller suitable for use in aviary, bird room, terrarium or any other application requiring a dawn, day, dusk to night simulation. Suitable for powering 12Vdc LED strip lights and incandescent bulbs of up to 4 Amps (48 Watts).
The module allows easy programming of the hour of activation for daybreak, the hour of activation for nightfall and the duration of the dawn and dusk transitions.
Useful in a variety of applications including poultry-farming, design studios, shop displays, nativity scenes, security and safety lighting and children's bedrooms.
The module is supplied fully assembled and has 9 LEDs that indicate status when programming and running. All you need to do is house it in a suitable enclosure, add a 12Vdc power supply*, wiring, switches and lights. *Power supply current rating must exceed your lighting load current draw plus 0.1A.
Suitable for use with conventional incandescent filament light bulbs and 12V LED strips only. NOT SUITABLE for use with inductive loads e.g. LED bulbs, transformers, etc.
Specifications| Operating Voltage | 12Vdc |
| Power Supply * | CFE135 or 660.453UK |
| Current consumption | 50mA (control electronics) |
| Output Load | 4 Amps (48 Watts) maximum |
| Time Setting Buttons | 1 Hour, 10 Minutes, 1 Minute increments |
| Indicators | Power LED |
| Dimensions (WxDxH) | Main Board: 110 x 55 x 32 mm Display Board: 134 x 40 x 17 mm |
| Enclosure | WCAH2852 or WCAH2851 |
| Weight | 113 grams |
| Product Format | PRE-ASSEMBLED Electronic Module Product Format Info |
