This 230Vac 750 Watt Dusk/Dawn Effect Lighting Controller Module will progressively adjust lighting brightness over a user set time period to mimic either sunrise (Day Effect) or sunset (Night Effect).
FeaturesThe Day/Night Effect inputs is normally connected to a 2-position SPDT toggle switch (not included) so the user can switch between the Day or Night cycles. Activating the Day Effect input will initiate the sunrise/day cycle. Output will remain in the "day" state (fully on) indefinitely. Releasing the Day Effect input and activating the Night Effect input will initiate the sunset/night cycle. It will then remain in the "night" state (fully off) indefinitely or until the Day Effect is initiated. If a 3 position SPDT switch is used the transition can be stopped at any point by selecting the centre position (neither cycle selected).
The Day/Night Effect inputs can also be connected to the SPDT relay output of a cyclical timer (e.g. VM188) for automatic and continuous switching between Day and Night cycles with quiescent adjustable times provided by the timer to produce a repeating virtual day effect of a duration to suit you needs.
The following adjustments/controls are available to the user:
Useful in a variety of applications including poultry-farming, design studios, security and safety lighting and children's bedrooms.
The module is supplied fully assembled and has an onboard safety fuse and LED 'On' indicator. All you need to do is house it in a suitable enclosure, add the wiring, switches and lights.
See Cebek R-111 for a more flexible version of this product.
Suitable for use with conventional incandescent filament light bulbs only. NOT SUITABLE for use with inductive loads or other types of bulbs e.g. fluorescent, CFL, halogen, transformer, etc.
SpecificationsOperating Voltage | 230Vac 50Hz mains |
Current consumption | 35mA min. - 130mA max. |
Output Load | 750 Watts maximum |
Output Load (Minimum) | 50 Watt minimum |
Delay timing period | 1 Sec. - 2 hours |
Dimensions (WxDxH) | 72 x 98.75 x 30 mm |
Control Switch | 785.663UK or 785.439UK (3-position On\Off/On) |
DIN Rail Mount | C7567 |
Enclosure | WCAH2851 |
Product Format | PRE-ASSEMBLED Electronic Module Product Format Info |
WARNING | Product operates at mains voltage and is not suitable for children. An isolating enclosure is required (not included). Installation, testing and commissioning should be performed by a competent person. Mains Electricity Info |