Continuity Tester Electronic Kit (Hi/Lo Range, Buzzer) Continuity Tester Electronic Kit (Hi/Lo Range, Buzzer) Quasar Electronics Two-range continuity tester electronic kit will buzz up to 3 Ohms on the LO range and 285 Ohms on the HI range. Box to house battery included. Ideal for education and hobby use... Electronics > Circuit Components > Printed Circuit Boards > Development Boards quasar_diy_k110 3110KT 9.95 Quasar Electronics Limited
Location
You Are Here : Home > Test & Measurement > Test Equipment Kits > General Test Equipment Kits > 3110KT - Continuity Tester Electronic Kit (Hi/Lo Range, Buzzer)

Continuity Tester Electronic Kit (Hi/Lo Range, Buzzer)

Continuity Tester Electronic Kit (Hi/Lo Range, Buzzer)
Continuity Tester Electronic Kit (Hi/Lo Range, Buzzer)
Continuity Tester Electronic Kit (Hi/Lo Range, Buzzer)
Continuity Tester Electronic Kit (Hi/Lo Range, Buzzer)
3110KT - Continuity Tester Electronic Kit (Hi/Lo Range, Buzzer)
Ability Level 2: ModerateMade in BritainProduct Formats Available : Pre-Assembled Module (AS) or
Self-Assembly Electronic Kit ( Soldering Required)

New improved continuity tester with louder buzzer.

A decent continuity tester is one of those esscential pieces of test equipment every hobbyist and professional alike need in their tool kit. Although most multimeters have a resistance range not all have a buzzer or the ability to select a low and high resistance range.

Our two-range continuity tester kit will buzz up to 3 Ohms on the LO range and up to 285 Ohms on the HI range. The instructions supplied also explain how you can set your own ranges by changing resistor values connected to the LM324 quad op-amp IC.

Ideal beginners or school project. Full circuit description provided. Box supplied houses PP3 battery (not included). Supplied with alligator clip leads shown but can used with your preferred probes.

Specifications
Supply9V PP3 battery (Order Code 656.020)
RangesLO range: 3 Ohm
HI range: 285 Ohm
Board Dimensions~ 40 x 60 x 40mm
Product FormatSELF-ASSEMBLY Electronic Kit (KT) Product Formats Info
DocumentationUser Manual
Your Total:

3110KT - Continuity Tester Electronic Kit (Hi/Lo Range, Buzzer) Selection

SELF-ASSEMBLY Continuity Tester KIT (Hi/Lo Range, Buzzer, Box)
Quasar 3110KT - SELF-ASSEMBLY Continuity Tester KIT (Hi/Lo Range, Buzzer, Box)
£8.29 Exc VAT, £9.95 Inc VAT | In Stock (UK Warehouse)
PRE-ASSEMBLED Continuity Tester Kit (Hi/Lo Range, Buzzer, Box)
Quasar AS3110 - PRE-ASSEMBLED Continuity Tester Kit (Hi/Lo Range, Buzzer, Box)
£14.13 Exc VAT, £16.96 Inc VAT | In Stock (UK Warehouse)

You might also like . . .

Velleman K8115 - Component Tester Kit

Build your own component tester and receive all useful information about resistors, diodes and many more. Auto shut-down. Shows Pin-out...

£36.95 Exc VAT, £44.34 Inc VAT
In Stock (UK Warehouse3)
Velleman MK132 - Cable Polarity Checker Electronic Kit

MK132 Cable Polarity Checker electronic construction kit is designed to check cables for continuity and identify individual wires...

£4.65 Exc VAT, £5.58 Inc VAT
In Stock (UK Warehouse3)
AS3024KT - CMOS / TTL Logic Probe Kit

This logic probe kit will provide you with a vital piece of equipment for testing and measuring digital equipment...

£8.29 £7.46 Exc VAT, £8.95 Inc VAT (Save 10%)
In Stock (UK Warehouse3)
Quasar Electronics Limited
Your Cart
Your Cart: Empty
Search
Categories
© 2018 Quasar Electronics Limited, all rights reserved worldwide. E & OE.
Exec Time: 0.04692 Seconds Memory Usage: 4.063293 Megabytes