The Cebek TL-101 is a 1-Channel 12Vdc powered Momentary or Toggling/Latching RF relay receiver module from our Group 1 range of 433.92MHz RF remote control modules - mix and match from a variety of receiver and transmitter options to suit your needs (see compatibility table below).
The relay outputs on this receiver module can be individually set to operate in either Momentary mode (turning on only while the transmitter button is held down) or Toggling/Latching mode (activating at the first push of the transmitter button and only disconnecting after a second push of the button).
Any number of Group 1 transmitters and receivers can be set to either accept or ignore other modules within range using the 13,122 security code combinations.
Features| Operating Voltage | 12Vdc |
| Current Consumption | 70mA |
| Suitable Power Supply | CFE113 |
| Output | 1 x SPDT Relay |
| Maximum Output Load (Resistive) | Up to 240Vac or 28Vdc @ 5 Amps max. (Relay Datasheet) |
| Relay Connections | NO, NC, C (Relay FAQ) |
| Output Channels | 1 |
| Relay Action | Momentary or Latching |
| RF Frequency | 433.92 MHz |
| Compatibility | RF Group 1 |
| Board Connections | Screw terminal blocks |
| Dimensions (WxDxH) | ~ 72 x 99 x 30mm |
| Weight | 80g |
| Product Format | PRE-ASSEMBLED Electronic Module Product Format Info |
| TL-5 | 1 Channel Keyfob RF Remote Control Transmitter, 30m |
| TL-6 | 2 Channel Keyfob RF Remote Control Transmitter, 30m |
| TL-11 | 1 Channel Handheld RF Remote Control Transmitter, 100m |
| TL-12 | 2 Channel Handheld RF Remote Control Transmitter, 100m |
| TL-13 | 1 Channel Handheld RF Remote Control Transmitter, 300m |
| TL-14 | 2 Channel Handheld RF Remote Control Transmitter, 300m |
| TL-15 | 2 Channel Fixed RF Remote Control Transmitter Module, 100m |
| TL-16 | 2 Channel Fixed RF Remote Control Transmitter Module, 300m |
| NB Only one channel will operate if you use a 1-channel transmitter with a 2-channel receiver. You can use a 2-channel transmitter with two 1-channel receivers (see User Manual for details). You cannot use multiple button presses or simultaneously use two transmitters if they are operating in range of one another (regardless of their coding). | |
