100-240Vac mains powered 1 channel opto-isolated IO DPDT relay board. The 4N25 optocouplers electrically isolate the control signal of each input from the corresponding DPDT mains rated relay output.
The inputs accept any trigger signal between 3 and 24V dc and the corresponding output will be activated and maintained till the input voltage decreases to zero.
An LED indicates each relays status. The power input has reverse polarity protection. Screw terminal blocks for all connections.
Specifications| Operating Voltage | 100-240V ac mains |
| Current | 3W max |
| Signal Inputs | 1 x 3-24Vdc opto-isolated |
| Signal Input Current | ~20mA @ 12Vdc |
| Outputs | 1 x DPDT Relay |
| Switching Frequency | 2 per second max. |
| Electrical Isolation | 1500V ac max. |
| Maximum Output Load (Resistive) | Up to 240Vac or 28Vdc @ 3 Amps max. |
| Relay Connections | NO, NC, C (Relay FAQ) |
| Board Dimensions | ~ 64 x 72 x 30 mm |
| Enclosure | WCAH2851 |
| DIN-Rail Mount | C7564 |
| Board Connections | Screw terminal blocks |
| Product Format | PRE-ASSEMBLED Electronic Module Product Format Info |
