8 channel opto-isolated IO board with triac outputs for controlling resistive AC mains loads (e.g. lamps, resistors, etc).
MOC3041 opto-couplers electrically isolate the DC control signal of each input and their output drives the corresponding BTA06-600B triac.
The inputs accept a TTL or CMOS trigger signal of between 3 and 24V dc and the corresponding output will be activated and maintained till the input voltage decreases to zero. The maximum load for each output is 230Vac/500 Watts. All outputs are fed from a common power supply input.
Screw terminal blocks for all connections.
This module is NOT suitable for use with inductive loads (like transformers, neon lamps, halogen lamps with transformer, motors, pumps, etc).
Specifications| Signal Inputs | 8 x 3 - 24V dc opto-isolated |
| Signal Input Current | ~20mA @ 12Vdc |
| Outputs | 8 x Triac |
| Output Voltage | 230V ac |
| Minimum Output Load | 50 Watts |
| Maximum Output Load (Resistive) | 500 Watts |
| Electrical Isolation | 1500V ac max. |
| Board Dimensions | ~ 107 x 200 x 20 mm |
| Board Connections | Screw terminal blocks |
| Product Format | PRE-ASSEMBLED Electronic Module Product Format Info |
| WARNING | Product operates at mains voltage and is not suitable for children. An isolating enclosure is required (not included). Installation, testing and commissioning should be performed by a competent person. Mains Electricity Info |
