The Cebek PM-7 is a pre-assembled Guitar Preamp module with 22K Ohm input impedance and operating voltage of 6-18Vdc. It is specifically designed for use as a preamp for electric guitars.
It draws very little power so can be powered from a PP3 battery for portable applications.
Onboard potentiometer for gain adjustment.
Can be used with Mono Pre-Amplifier Module with Tone Controls (Cebek PM-5).
Supplied fully assembled and tested with instructions so you only need to make the necessary connections.Specifications
|Supply Voltage||6-18V dc (e.g. CFE103 or CFE002)|
|Current Consumption||2mA min. - 10mA max.|
|Input Impedance||22K Ohms|
|Signal Input||5mV min. - 300mV max.|
|Output Signal||2V max.|
|Output Impedance||1K Ohm|
|S/N Ratio||80 dB|
|Frequency Response||30Hz - 17KHz|
|Dims. (WxDxH)||50 x 35 x 20 mm|
K4102 Guitar Preamplifier with Headphone Output electronic kit has been designed for this purpose and provides you with a headphone output, allowing you to practice without disturbing others...
Multipurpose black ABS plastic enclosure approx. 83 x 54 x 30mm that can be used to house a number of suitable size kits and modules...
Nominal 12Vdc, 130 mA stabilised power supply module complete with an onboard 230Vac mains transformer. The module provides a stabilised, adjustable (10-15V) output with short circuit protection, onboard fuse, LED 'On' indicator and screw terminal blocks ...
Mono Pre-Amplifier Module with Tone Controls. It allows independent adjustment of treble and bass from a mono signal...
Fuzzbox for Electric Guitar module special effect that can be used with all kind of electric guitar. The module will limit the signal and introduce many harmonics...