1 to 4 day precision delay timer module with a 5 Amp, 230Vac mains rated relay output. The delay time is set in 1 hour blocks using two banks of on-board DIP switches. Push-button or power-on activation. When activated the relay will operate until the time period has elapsed. 12Vdc powered.
Timer is activated via the Start Input (using for example a push button or relay contact closure). On activation the relay turns on for the user-set delay time period. The timer will complete the preset timing period regardless of further trigger signals or if the contacts remain closed after activation. Once finished, a fresh trigger signal is needed to start a new timing period.
Optional Power-Start mode. Start input disabled. Relay turns on and delay countdown commences immediately power is applied to the board. Relay turns off at timeout. Power must be removed and reapplied for a fresh countdown to commence. Power-Start mode is set using a header jumper (not included - Order Code JUMPER-RED).
An LED indicates that the timer is in operation. The board is reverse polarity protected.
Specifications| Supply Voltage | 12V dc |
| Power Supply Options | Power Supply Module: CFE103 or UK Plug Power Supply: 660.446UK with connector 777.001UK |
| Current Consumption | 10-60mA |
| Minimum Time | 25 hour |
| Maximum Time | 4 days |
| Output | 1 x SPDT Relay |
| Maximum Output Load (Resistive) | Up to 240Vac or 28Vdc @ 5 Amps max. (Relay Datasheet) |
| Relay Connections | NO, NC, C (Relay FAQ) |
| Dimensions (WxDxH) | ~ 88 x 52 x 30 mm |
| Enclosure | WCAH2853 |
| Product Format | PRE-ASSEMBLED Electronic Module Product Format Info |
