4-digit stopwatch timer board with Start, Pause, Stop, Display Toggle and Reset functions. Displays time elapsed in Seconds and Hundredths. At the end of every minute the display changes over for 1 second to show the elapsed Hours and Minutes time. It then reverts to displaying and counting seconds and hundreths. An open collector output pulses low for 20mS on the minute when the timer is running. Maximum time is 99H 59M 59.99S.
The stopwatch functions operate as follows:
The board has an active low open collector transistor output (NPN, 100mA @ 30V). This can be used with to drive our 3156 relay boards or the 3141 delay timer board. Please refer to individual firmware documentation for details of how the output behaves.
Connections: DC IN, RESET, OUTPUT, STOP and START are brought out to a 10-way header strip for easy connection.
START and STOP buttons are also provided on the board.NEW LONG DURATION VERSION AVAILABLE
Similar in operation to the description above but displays time elapsed in Minutes and Seconds (no Hundredths). At the end of every minute the display changes over for 1 second to show the elapsed Hours time. It then reverts to the minutes and seconds display. Open collector output pulses low for 20mS on the minute when the timer is running. Maximum time is 9999H 59M 59S. See Order Code AS3148T6 below.Custom Firmware Design Service
If you would like the stopwatch to function differently please Contact Us with your requirements.Specifications
|Supply||9...15V dc |
e.g. Order Code 660.446UK with connector 778.106
|Current||30 - 50mA max.|
|Timing ranges||0 to 99h 59m 59.99s|
|Timing resolution||1/100 second|
|Inputs||Start / Stop / Reset (Active low - see documentation)|
|Output Type||Open collector NPN transistor, 100mA @ 30V |
(see Help Sheet)
|Display||4-digit 7-segment with decimal point, 14mm RED LED|
|Connections||10 pin SIL header|
|Product Formats||SELF-ASSEMBLY Electronic Kit (KT) or|
PRE-ASSEMBLED Electronic Module (AS) Product Formats Info
|Documentation||3148T2 User Manual|
Large 10cm main display. Four operation modes: Count-Up Timer (programmable up to 99M:59S max.), Count-Down Timer (up to 99M:59S max.), Interval Timer (up to 99M:59S max.) and 12/24hr Clock. Supplied pre-assembled and cased. Large front display and small top display...
0-99 minute or 0-99 hour chronometer with Preset and 4 digit BCD output for driving BCD digital display modules. Functions include Count Up/Down, Start/Stop, Reset and Next. Preset allows you to set a stop time. When reached the chronometer will stop and the on-board output relay is activated...
Digital stopwatch chronometer with a maximum time of 59 Minutes, 59 Seconds. The 4 digit LED display is available in 4 different display sizes: 13mm, 25mm, 58mm or 100mm high digits. Functions include Count Up/Down, Start/Stop and Reset. ..
Digital stopwatch chronometer with Preset, mains rated relay output and USB remote control interface. 4 digit LED display is available in 4 different display sizes: 13mm, 25mm, 58mm or 100mm high digits...