This Remote Control Via GSM Mobile Phone kit is a useful little board that will enable you to turn equipment on and off from any location with mobile phone coverage.
The MK160 light sensor is placed next to a mobile phone screen as shown in the image. The MK160 activates when the phones backlight illuminates in response to an incoming call (so you will not even incur any call charges to operate the device provided you hang-up in time).
Since the MK160 is really just a light activated switch, it should be placed with the mobile phone in a dark location or lightproof enclosure for reliable operation. The phone settings should be adjusted so the backlight only comes on in response to an incoming call.
The relay can be set to operate in either timer auto-off mode (0.5Sec - 1 Hour) or toggle ON/OFF mode (call twice to turn on, call again to turn off).
NB Mobile phone NOT supplied.
Also available in PRE-ASSEMBLED Electronic Module format (Order Code MMK160)
FeaturesDual operation modes | 1. Toggle ON/OFF (call twice to turn on, call again to turn off) 2.ON with auto turn-off timer (0.5 seconds - 1 hour) |
Timer settings | 0.5s, 2s, 30s, 1 min, 5 min, 15 min, 30 min and 1 hour |
Supply Voltage | 12Vdc (e.g. 660.446UK) |
Current Consumption | Standby: <15mA Relay Active: ~50mA |
Output | 1 x SPDT Relay |
Relay Rating | 230Vac, 3A rated relay output |
Relay Connections | NO, NC, C |
Dimensions | 101 x 42 x 23mm (4.0" x 1.7" x 0.9") |
Enclosure | WCAH2853 / WCAH2851 / WCAH2852 (depending on mobile phone size) |
Control Knob | KB0295 |
Product Formats | Self-Assembly Electronic Kit (KT) Product Formats Info |
Documentation | Velleman MK160 Assembly Manual |