You can use this DTMF Decoder board to control up to 8 electrical devices simply by calling your phone from any location in the world and making a few key presses.
Each channel has a mains rated 5 amp relay output that can be independently controlled and an LED indicating the relays status. The relay status can also be verified over the phone line. You can use the relays to control any devices you have in your house, office or factory.
4 number user-settable access code for security. The circuit is PIC based for accuracy and reliability. The unit will answer the incoming call almost immediately (1 ring). This setting is not user adjustable. If you require more flexibility please see our 4-Channel DTMF Telephone Remote Control Relay Switcher (3140).
The board includes an impedance matching transformer. RJ-11 telephone Line-in and Extension-Out sockets. Solder posts for relay and power connections. Solder provided with kit version.
Versions1186KT and AS1186-4 are supplied with 4 relays
Additional relays can be purchased to populate the remaining 4 positions (Order Code RLY-40.31-SPDT-10A).
AS1186-8 is supplied with all 8 relay positions populated
|Supply Voltage||12Vdc, 0.5A (Order Code 660.446UK with connector 778.106)|
|Outputs||8 (Only four positions populated with SPDT Relays in 1186KT and AS1186-4)|
|Maximum Output Load||5 Amps @ 230Vac max. per relay|
|Relay Connections||Common, Normally Open (the Normally Closed relay contact is present but NOT brought out)|
|User Settings||1. Password (4 digits)|
|Board Dimensions||126 x 134 mm|
|Board Connections||2 x RJ11 Telephone Sockets (Line-In / Extension-Out)|
Solder posts for power and relay connections
|Compatibility||* This product can be connected to any analogue or broadband phone line and both corded or cordless (analogue and DECT) telephone sets and is operated using simple DTMF tones.|
|Product Formats||SELF-ASSEMBLY Electronic Kit (KT)or|
PRE-ASSEMBLED Electronic Module (AS) Product Formats Info
High quality RJ11 6P4C plug to plug leads supplied with UK BT431A telephone adaptor...
ADSL broadband modem lead with BT431A telephone plug adaptor range. Constructed from high quality CAT5 twisted pair cable to give maximum signal transfer...
This kit makes it possible to turn up to three devices on or off over the telephone. It is also possible to check the condition of a switch (open or closed)...
MK160 Remote Control Via GSM Mobile Phone kit is a useful little board that will enable you to turn equipment ON and OFF from any location with mobile phone coverage...
This device connects to your telephone line and has 4 relay outputs capable of switching 5 amps max. You can then call your number using a DTMF (tone dialling) telephone from anywhere in the world and remotely turn...