This product is discontinued - please see alternatives in parent category link shown above.
High quality power supply with a continuously variable Stabilised output adjustable at any value between 0 and 30Vdc.
It also incorporates an electronic output current limiter that effectively controls the output current from a few milliamps (2 mA) to the maximum output of 3 Amps.
This facility makes this power supply indispensable in the experimenter's laboratory as it is possible to limit the current to the typical maximum that a circuit under test may require. Untested circuits can be powered up without any fear that it may be damaged if something are any problems. There is also a visual indication that the current limiter is in operation so that you can see at a glance that your circuit is exceeding or not its preset limits.Features
|Input Voltage||24Vac - see below|
|Input Current||3A (max)|
|Output Voltage||0-30 V adjustable|
|Output Current||2 mA-3 A adjustable|
|Output Voltage Ripple||0.01 % maximum|
|Board Dimensions||108 x 83 x 40 mm|
|Heatsink Dimensions||121 x 63 x 38 mm|
|Board Connections||Solder Posts|
|Product Format||SELF-ASSEMBLY Electronic Kit (KT) Product Formats Info|
|Documentation||1138 User Manual|
Configuration as a Dual PSU
K7203 3-30V, 3A Power Supply electronic kit is meant as an auxiliary or as a permanent power supply for all commonkits based on a stabilised DC voltage between 3 and 30V provided that the consumption does not exceed 3A...
A good quality and reliable variable voltage, stabilised power supply that is ideal for the hobbyist or professional laboratory. The kit features short circuit protection, variable DC voltages from 3-30V and a rated output of 2.5 Amps which is sufficient for most applications...
RF transmitters and receivers demand special power supplies in order to avoid many serious problems like noise, overheating, standing waves, etc...
Variable 3 to 27Vdc, 4A max. stabilised power supply module. 6-30Vdc input. Short circuit protection. Screw terminal blocks...