Microphone preamplifier self-assembly KIT for use with any dynamic microphone. Provides separate master BASS and TREBLE controls and two OUTPUTS. Each OUTPUT has an individual VOLUME control and is sufficiently high to drive a power amplifier, a monitor circuit or both.
The frequency response of the circuit is quite broad, the distortion is low and the sensitivity and output levels are quite high.
Used with kit 1127 it can form a complete, professional quality microphone mixing console with individual and master controls.
Kit version includes solder for assembly.Specifications
|Input impedance||500 Ohm|
|Input sensitivity||1 - 300mV|
|Output impedance||10K Ohm|
|Output level||100mV pp|
|Distortion (THD)||0.1% max.|
|Bass/Treble adj.||12 dB|
|Working voltage||30V DC|
|Board Connections||Solder posts|
|Product Formats||SELF-ASSEMBLY Electronic Kit (KT) or|
PRE-ASSEMBLED Electronic Module (AS) Product Formats Info
A small microphone preamplifier suitable for dynamic and condenser (electret) mikes. Very useful for CB transceivers, transmitters, MIXERS, Disco's, PA Systems, etc...
This is the MASTER unit that can be used in combination with one or more kit 1126 units to form a complete MICROPHONE MIXER CONSOLE...
This useful little board will amplify the signal from a wide range of microphones to line level...
A 47K Ohm high impedance mono microphone audio preamp module that runs from a 6-18V dc power supply (for example our CFE002) and has an onboard potentiometer for gain adjustment...