Stabilised Heavy Duty Variable RF Power Supply Kit, 8 - 20Vdc, 8A Stabilised Heavy Duty Variable RF Power Supply Kit, 8 - 20Vdc, 8A Default Manufacturer Heavy duty power supply with variable voltage and current limiting that delivers a pure, clean, stable DC output from 8 - 20Vdc with 150 Watts maximum power. Special RF protection filters make it particularly suitable for powering FM transmitters, CB radios and linear amplifiers... Electronics > Circuit Components > Printed Circuit Boards > Development Boards smartkit_1056kt 1056KT View Offer Quasar Electronics Limited
Location
You Are Here : Home > Electrical & Power > Power Supply Kits - Boards > Variable Voltage Power Supply Kits > 1056KT - Stabilised Heavy Duty Variable RF Power Supply Kit, 8 - 20Vdc, 8A

Stabilised Heavy Duty Variable RF Power Supply Kit, 8 - 20Vdc, 8A

Stabilised Heavy Duty Variable RF Power Supply Kit, 8 - 20Vdc, 8A
Stabilised Heavy Duty Variable RF Power Supply Kit, 8 - 20Vdc, 8A
Stabilised Heavy Duty Variable RF Power Supply Kit, 8 - 20Vdc, 8A
Stabilised Heavy Duty Variable RF Power Supply Kit, 8 - 20Vdc, 8A
1056KT - Stabilised Heavy Duty Variable RF Power Supply Kit, 8 - 20Vdc, 8A
Ability Level 3: IntermediateProduct Format : Self-Assembly Electronic Kit ( Soldering Required)
Ability Level 3 : Intermediate

This product is discontinued - please see alternatives in parent category link shown above.

Heavy duty power supply with variable voltage and current limiting that delivers a pure, clean, stable DC output from 8 - 20Vdc with 150 Watts maximum power.

Special RF protection filters make it particularly suitable for powering FM transmitters, CB radios and linear amplifiers.

Tried and tested design that uses a voltage control stage to drive a circuit consisting of four power transistors that keep the voltage constant and can handle quite heavy currents. Finally there is an electronic current limiter which constantly monitors the current drawn from the out put of the circuit and if that exceeds a certain level it switches the supply off to prevent any possible damage to the output transistors or to the circuit connected to the supply

  • Stabilised output voltage even at maximum current
  • Shorted output current limited and adjustable from 3 - 5 Amps
  • Fully protected against overloading and short circuits
  • RF filters incorporated to protect the circuit from interference that could affect stability
  • Uses 3 off 2N3055 power transistors.

The kit comes complete with complete with 2 pre-drilled heatsinks for the power transistors. You need to add a 24Vac/8A mains transformer.

Kit includes solder for assembly.

Features
  • Stabilised output voltage even at maximum current
  • Shorted output current limited and adjustable from 3 - 5 Amps
  • Fully protected against overloading and short circuits
  • RF filters incorporated to protect the circuit from interference that could affect stability
  • Uses 3 off 2N3055 power transistors.
Specifications
Supply24V ac / 8A transformer (not supplied)
Output Voltage8 - 20V dc variable
Output Current8 Amps max.
Heatsinks Dimensions1 @ 75x100x25
1 @ 35x100x25mm
Board Dimensions67x155mm
Control KnobKB0295
Board ConnectionsSolder Posts
Product FormatSELF-ASSEMBLY Electronic Kit (KT) Product Formats Info
DocumentationUser Manual
Obsolete/Discontinued

You might also like . . .

1007KT - Stabilised Variable Power Supply Kit, 3-30Vdc, 2.5A

A good quality and reliable variable voltage, stabilised power supply that is ideal for the hobbyist or professional laboratory. The kit features short circuit protection, variable DC voltages from 3-30V and a rated output of 2.5 Amps which is sufficient for most applications...

£21.63 £14.96 Exc VAT, £17.95 Inc VAT (Save 31%)
In Stock (UK Warehouse3)
1171KT - Stabilised RF Power Supply Kit, 12-14Vdc, 3A

RF transmitters and receivers demand special power supplies in order to avoid many serious problems like noise, overheating, standing waves, etc...

Cebek FE-15 (CFE015) - Power Supply Module, 19-30Vdc, 5A with 230Vac Chassis Transformer

19-30Vdc (24V nominal), 5 Amp adjustable stabilised power supply module complete with 230Vac mains transformer. Short circuit protection. Screw terminal blocks...

£44.04 Exc VAT, £52.85 Inc VAT
In Stock (UK Warehouse3)
Cebek FE-203 (CFE203) - Variable Power Supply Module, 3 - 27Vdc, 4A

Variable 3 to 27Vdc, 4A max. stabilised power supply module. 6-30Vdc input. Short circuit protection. Screw terminal blocks...

Buy 1-4: £23.56 Exc VAT, £28.27 Inc VAT Each
Buy 5+: £21.99 Exc VAT, £26.39 Inc VAT Each
In Stock (UK Warehouse3)
Quasar Electronics Limited
Your Cart
Your Cart: Empty
Search
Categories
© 2018 Quasar Electronics Limited, all rights reserved worldwide. E & OE.
Exec Time: 0.045178 Seconds Memory Usage: 4.043762 Megabytes