This well designed 25W per channel stereo power amplifier can be used to boost the output of an existing lower power stereo amplifier. The input should be in the region of 1 to 5 Watts with 2W output being the ideal level.
It can be connected directly to the output of car stereo systems, cassette players, CD players, radioa or other stereo amplifiera whose output you wish to boost.
IThe circuit employs two TDA1515 ICs, one per channel and each connected in a BTL configuration to deliver twice the output power. Additional circuitry is used to adjust the frequency response and ensure stable operation under a wide range of operating conditions. Two heatsinks are included.
FeaturesInput | 1 to 5 Watts |
Input sensitivity | 1.45V RMS (for max. output) |
Output power | 2 x 25 W max. |
Output load impedance | 4 Ohms |
Frequency response | 40 Hz-20 KHz |
Input voltage | 12-15Vdc |
Power Supply | 12V battery, CFE013 or similar (not included) |
Quiescent current | 130 mA (both channels) |
Max. current | 3.2 A (both channels) |
Dimensions | 65x75x105mm |
Board Connections | Solder Posts |
Product Formats | SELF-ASSEMBLY Electronic Kit (KT) or PRE-ASSEMBLED Electronic Module (AS) Product Formats Info |
Documentation | 1046 User Manual Amplifier Power Supply General Advice |