The PTX001-PRX001R is a remote control set comprising a 1 button keyfob style transmitter and receiver module with a 1 Amp rated relay output that can be user-set to either momentary or toggle latching action.
* Important Product Operation Info: with the PTX001 product range, Momentary Mode operation is different to normal. When the keyfob button is pressed and held for longer than about 2 seconds, the relay output will turn off for about 2 seconds and then keep repeating this 2 second on/off cycling until the keyfob button is released.
FeaturesAlso available as a set with an open-collector transistor output receiver module (Order Code PTX001-PRX001G).
Extra transmitter fobs (Order Code PTX001) are available separately. To code them you simply press the keyfob button and the learn button on the receiver module (see User Manual below for instructions).
SpecificationsReceiver Module | |
Supply Voltage | 10-16Vdc (e.g. Order Code 660.446UK with connector 777.001UK or CFE103 module) |
Current Consumption | 6mA standby, 50mA max. active |
Operating Temp | Operating: 7mA Standby: 6mA |
Output Operation | Momentary or Toggle Action Relay |
Maximum Output Load (Resistive) | Up to 16Vdc @ 1 Amps max |
Output Connections | Dry contact closure |
Connections | Flying leads (30cm long approx.) Red - Positive Supply (10-16Vdc) Black - Negative Supply White - Relay (C) Blue - Relay (NO) Green - Antenna wire (45cm approx.) |
Operating Temp | -10 to + 65 C |
Dimensions (mm) | 60 x 65 x 25 |
Transmitter Keyfob | |
Supply Voltage | 12Vdc |
Battery | 1 x GPA23 alkaline battery included |
Current Consumption | Operating: 5mA Standby: 0mA |
Operating Temp | -10 to + 65 C |
Dimensions (mm) | Case: 52 x 35 x 13 PCB: 31 x 35 x 10 |
Product Format | PRE-ASSEMBLED Electronic Module Product Format Info |
Documentation | PTX001-PRX001 Series User Manual |