This pre-assembled module allows you to record and re-record a single message of up to 60 seconds duration using the on-board microphone. You can then repeatedly replay the message using a switch (not included) connected to the Play input. Two modes of operation can be selected for the Play input:
A similar choice of modes can be selected for the Record input.
In addition, there is a Repeat switch to select one of these two modes (they operate the same in both the Play modes detailed above):
Message is digitally stored in non-volatile memory and is retained if power is removed.
The board needs a 12Vdc supply and is reverse polarity protected. Screw terminal blocks for all connections.
N.B. Output will drive a small 8 Ohm speaker only (it is not suitable for any other impedance speaker or connection to an external audio amplifier).
Specifications| Operating Voltage | 12Vdc e.g. Order Code CFE113 |
| Current | 200 mA max |
| Audio input | Onboard microphone |
| Sampling Rate | 8 KHz |
| Total recording time | 60 Seconds |
| Maximum single message time | 60 Seconds |
| Maximum number of messages | 1 |
| Output power | 0.5 Watts RMS at 8 Ohms |
| Output impedance | 8 Ohm speaker only |
| Loop Mode | Yes |
| Board Dimensions | ~ 72 x 53 x 20 mm |
| DIN Rail Mount | C7563 |
| Enclosure | WCAH2853 |
| Board Connections | Screw terminal blocks |
| Product Format | PRE-ASSEMBLED Electronic Module Product Format Info |
