The Cebek TL-602 is a 2-Channel 230Vac mains powered Momentary, Toggling/Latching or Timer RF relay receiver module supplied pre-built in an IP55 rated enclosure.
Each relay output on this receiver board can be set individually to operate in the following modes:
Reset Inputs: each channel has a reset input to immediately turn off (or disable) the corresponding relay output (all operating modes). Connect to volt-free contact closure like a switch, manual over-ride button, etc. All channels are disabled if any of the reset inputs remain closed.
From our Group 3 range of 433.92MHz RF remote control modules - mix and match from a variety of receiver and transmitter options to suit your needs (see compatibility table below). Up to 5 Group 3 transmitters can be learnt by a receiver. Other unlearnt transmitters within range will be ignored.Specifications
|Output||2 x SPDT Relay|
|Up to 240Vac or 28Vdc @ 3 Amps max. (Relay Datasheet)|
|Relay Connections||NO, NC, C (Relay FAQ)|
|Relay Action||Momentary, Latching|
|RF Frequency||433.92 MHz|
|Board Connections||Screw terminal blocks|
|Dimensions||160 x 120 x 75 mm|
|Approvals||89/336/EEC, 23/31/CEE, 93/68/CEE, regulations|
ROHS ETS 300-200
|Product Format||PRE-ASSEMBLED Electronic Module Product Format Info|
|CTL300||1-Channel Remote Control Transmitter, 25m|
|CTL301||2-Channel Remote Control Transmitter, 25m|
|CTL321||1-Channel Remote Control Transmitter, 100m|
|CTL322||2-Channel Remote Control Transmitter, 100m|
|CTL323||1-Channel Remote Control Transmitter, 300m|
|CTL324||2-Channel Remote Control Transmitter, 300m|
|NB Only one channel will operate if you use a 1-channel transmitter with a 2-channel receiver. You can use a 2-channel transmitter with two 1-channel receivers (see User Manual for details). You cannot simultaneously use two transmitters if they are operating in range of one another (regardless of their coding).|
25m range, 2-channel (two button) key fob style 433.92MHz RF transmitter for Cebek Group 3 remote control receivers...
2 Channel Handheld Remote Control Transmitter (100m) from our Group 3 range of 433.92MHz two channel RF remote control modules. Mix and match to suit your needs...
2 Channel Handheld Remote Control Transmitter (300m) from our Group 3 range of 433.92MHz two channel RF remote control modules. Mix and match to suit your needs...
Externally-mounted vertical rod antenna optimised for 433.92 MHz RF radio circuits. Particularly suitable for Cebek RF remote control receiver modules...