The Cebek TL-422 is a highly flexible expandable 4-Channel 12Vdc powered RF relay receiver module with Momentary, Toggling/Latching or Delay Timer operating modes.
Each relay output on this receiver board can be set individually to operate in the following modes:
Reset Inputs: each channel has a reset input to immediately turn off (or disable) the corresponding relay output (all operating modes). Connect to volt-free contact closure like a switch, manual over-ride button, etc. All channels are disabled if any of the reset inputs remain closed.
The board can be expanded using either the 4-Channel Expansion Module (CTL424) or 8-Channel Expansion Module (CTL425) expansion modules to provide additional independently controllable relay outputs. A wide range of transmitter options is available.
From our Group 3 range of 433.92MHz RF remote control modules - mix and match from a variety of receiver and transmitter options to suit your needs (see compatibility table below). Up to 5 Group 3 transmitters can be learnt by a receiver. Other unlearnt transmitters within range will be ignored.Specifications
|Current Consumption||250mA max|
|Suitable Power Supply||CFE113|
|Output||4 x SPDT Relay|
|Up to 240Vac or 28Vdc @ 3 Amps max. (Relay Datasheet)|
|Relay Connections||NO, NC, C (Relay FAQ)|
|Relay Action||Momentary, Latching or Timer (0.1 to 132 Seconds)|
|RF Frequency||433.92 MHz|
|Antenna||Not included - 130mm cable or Order Code C-0509|
|Board Connections||Screw terminal blocks|
|Board dimensions||~ 121x 107 x 30 mm|
|Product Format||PRE-ASSEMBLED Electronic Module Product Format Info|
|CTL424||4-Channel Expansion Module for TL-422/TL-423, 12Vdc|
|CTL425||8-Channel Expansion Module for TL-422/TL-423, 12Vdc|
|NB Only one channel will operate if you use a 1-channel transmitter with a 2-channel receiver. You can use a 2-channel transmitter with two 1-channel receivers (see User Manual for details). You cannot simultaneously use two transmitters if they are operating in range of one another (regardless of their coding).|
|CTL420||4-Channel Handheld RF Remote Control Transmitter, 100m|
|CTL421||8-Channel Handheld RF Remote Control Transmitter, 100m|
|CTL428||16-Channel Handheld RF Remote Control Transmitter, 100m|
|CTL429||8-Channel Remote Control Transmitter Module, 100m|
|CTL430||4-Channel Handheld RF Remote Control Transmitter, 300m|
|CTL431||8-Channel Handheld RF Remote Control Transmitter, 300m|
|CTL432||16-Channel Remote Control Transmitter Module, 100m|
|CTL438||16-Channel Handheld RF Remote Control Transmitter, 300m|
|CTL439||8-Channel Remote Control Transmitter Module, 300m|
|CTL442||16-Channel Remote Control Transmitter Module, 300m|
Nominal 12Vdc, 270 mA stabilised power supply module complete with an onboard 230Vac mains transformer. The module provides a stabilised, adjustable (10-15V) output with short circuit protection, onboard fuse, LED 'On' indicator and screw terminal blocks ...
4 Channel Handheld Remote Control Transmitter. Long range up to 100 metres. Battery powered. From our Group 3 range of 433.92MHz RF remote control modules. Mix and match to suit your needs...
4 Channel Handheld Remote Control Transmitter. Extra long range up to 300 metres. Battery powered. From our Group 3 range of 433.92MHz RF remote control modules. Mix and match to suit your needs...
Externally-mounted vertical rod antenna optimised for 433.92 MHz RF radio circuits. Particularly suitable for Cebek RF remote control receiver modules...