The Cebek TL-312 is a highly flexible 1-Channel 230Vac mains powered Momentary, Toggling/Latching or Timer RF relay receiver module in a DIN rail mountable enclosure.
The relay output on this receiver module can be set to operate in the following modes:
MOMENTARY MODE: Relay turns on only while the transmitter button is held down and turns off 1 second after button is released
TOGGLING/LATCHING MODE: relay activates at the first push of the transmitter button and disconnects after a second push of the button
TIMER MODE: relay activates for a user adjustable on-time of between 0.1 and 132 Seconds. Timer is a non-cumulative retriggerable type. Any further button presses made while the timer is active will restore the full delay time (non-cumulative) without interrupting the relay. If no new triggers are received before the delay timeout is reached, the relay will turn off and the channel reset ready for a new trigger signal.
LED status indicators for Power, Relay and Program. Short antenna wire included.
From our Group 3 range of 433.92MHz RF remote control modules - mix and match from a variety of receiver and transmitter options to suit your needs (see compatibility table below). Up to 5 Group 3 transmitters can be learnt by a receiver. Other unlearnt transmitters within range will be ignored.
NB Only one channel will operate if you use a 1-channel transmitter with a 2-channel receiver. You can use a 2-channel transmitter with two 1-channel receivers (see User Manual for details). You cannot use multiple button presses or simultaneously use two transmitters if they are operating in range of one another (regardless of their coding).