Cebek
4 channel opto-isolated IO board with mosfet transistor output. The optocouplers electrically isolate the control signal of each input from the corresponding open collector output...
Electronics > Circuit Components > Printed Circuit Boards > Development Boards
cebek_t_2
T-2
21.42
Quasar Electronics Limited
https://quasarelectronics.co.uk/Item/cebek-t-2-4-channel-isolated-io-mosfet-board-module
4 channel opto-isolated IO board for switching DC loads using control signals. 4x P16NF06 Mosfet power transistor outputs. 4N25 optocouplers electrically isolate the control signal of each input from the corresponding open collector output.
The inputs accept any trigger signal between 3 and 24V dc and the corresponding output will be activated and maintained till the input voltage decreases to zero. The maximum continuous load for each output is up to 50V, 2 Amps. All outputs are fed from a common power supply input.
Reverse polarity protection. Screw terminal blocks for all connections.
Specifications| Signal Inputs | 4 x 3-24Vdc opto-isolated |
| Signal Input Current | 5mA Min (~20mA @ 12Vdc) |
| Outputs | 4 x Open collector mosfet |
| Output Voltage | 3V min - 50Vdc max. |
| Continuous Output Load (Resistive) | 2 Amps per output |
| Peak Output Load (Resistive) | 3 Amps per output |
| Board Dimensions | ~ 107 x 121 x 20 mm |
| DIN-RAIL Mount | C7589 |
| Board Connections | Screw terminal blocks |
| Product Format | PRE-ASSEMBLED Electronic Module Product Format Info |
4 channel opto-isolated IO SPDT relay board. The optocouplers electrically isolate the control signal of each input from the corresponding mains rated relay output...
4 channel opto-isolated IO board with triac output for controlling resistive ac mains loads e.g. lamps, resistors, etc. The optocouplers electrically isolate the control signal of each input from the corresponding triac output...
8 channel opto-isolated IO board with triac output for controlling resistive ac mains loads (e.g. lamps, resistors, etc.). The optocouplers electrically isolate the control signal of each input from the corresponding triac output...
8 channel opto-isolated IO board with mosfet transistor output. The optocouplers electrically isolate the control signal of each input from the corresponding open collector output...
