4 Output Cyclical Night/Day Lighting Controller (230Vac, 500W) 4 Output Cyclical Night/Day Lighting Controller (230Vac, 500W) Cebek 230Vac, 4 output cyclical Day/Night lighting controller providing a repeating virtual-day simulation effect (Sunrise-Day-Sunset-Night) with user adjustable times. Each output is active at different parts of the virtual day and rated for loads of up to 500 Watts... Electronics > Circuit Components > Printed Circuit Boards > Development Boards cebek_r_16 R-16 54.31 Quasar Electronics Limited
Location
You Are Here : Home > Electronic Kits & Modules > Light Effect - Controller Kits > Dusk Dawn Lighting Simulator Modules > Cebek R-16 (CR016) - 4 Output Cyclical Night/Day Lighting Controller (230Vac, 500W)

4 Output Cyclical Night/Day Lighting Controller (230Vac, 500W)

Cebek R-16 (CR016) - 4 Output Cyclical Night/Day Lighting Controller (230Vac, 500W)
Cebek R-16 Electronic Module (Pre-Assembled)
Cebek Electronic Modules

230Vac, 4 output cyclical Day/Night lighting controller providing a repeating virtual-day simulation effect (Sunrise-Day-Sunset-Night) with user adjustable times. Each output is active at different parts of the virtual day and rated for loads of up to 500 Watts. Can be used to power a different lighting circuit, providing flexibility for producing virtual day and night scenes in nativity scenes, models, shop displays, etc.

Four x 4 Amp outputs provide control of lighting based on different periods of the day:

  • Output A: Daybreak > DAY > Nightfall
  • Output B: Nightfall > NIGHT > Daybreak
  • Output C: Auxiliary DAY
  • Output D: Auxiliary NIGHT
  • Operating Cycle and Output State Diagram (See image above)

The Sunrise/Sunset transition time is user adjustable providing a fast or gradual transition in lighting intensity. The length of the Day/Night phases of the day cycle are also user adjustable.

The shortest duration one "day" can be set to is 4 seconds and the longest day duration possible is 8 hours.

The Auxiliary Outputs are active during the respective Day or Night part of the cycle.

The Start Point setting allows selection of the desired initial state (either Daybreak, Day, Nightfall or Night) when power is applied

The module is supplied fully assembled and has an onboard safety fuse. All you need to do is house it in a suitable enclosure, add the wiring, output fuses and lights.

Applications include

  • nativity models
  • shop / window displays
  • art installations
  • hydroponics

Suitable for use with conventional incandescent filament light bulbs only. NOT SUITABLE for use with inductive loads or other types of bulbs e.g. fluorescent, CFL, halogen, transformer, etc.

Specifications
Operating Voltage230Vac 50Hz mains (the interference filter mentioned in the User Manual is optional and is not necessary in most installations)
Maximum Load (per output)500 Watts
Minimum Load (per output)50 Watts
Outputs (see image
above for graphical
representation)
A. Full Day Cycle (Dawn - Day - Dusk - Night)
B. Full Night Cycle (Dusk - Night - Dawn - Day)
C. Day Phase (Steady on 80% of full cycle)
D. Night Phase (Steady on 20% of full cycle)
Ramp Time Adjustment1-120 Seconds or 1-120 Minutes
Solid Time Adjustment1-120 Seconds or 1-120 Minutes
Dimensions118 x 101 x 25 mm
EnclosureWCAH2852
Product FormatPRE-ASSEMBLED Electronic Module Product Format Info
WARNINGProduct operates at mains voltage and is not suitable for children. An isolating enclosure is required (not included). Installation, testing and commissioning should be performed by a competent person. Mains Electricity Info
Item Number:
Cebek R-16 (CR016)
Total Price:
£45.26 +VAT, £54.31 Inc
Stock Info:
In Stock (UK Warehouse)
Your Total:
Quantity:

You might also like . . .

Cebek R-11 (CR011) - Dusk/Dawn Effect Lighting Controller Module, 230Vac 50Hz, 750W

230Vac, 750W Dusk/Dawn Effect Lighting Controller Module (230Vac 50Hz, 750W) will progressively adjust lighting brightness over a user set time period to mimic either sunrise/day (Day Effect) or sunset/night (Night Effect)...

£19.45 +VAT, £23.34 Inc
In Stock (UK Warehouse)
Cebek R-13 (CR013) - Dusk/Dawn Effect Lighting Controller Module, 230Vac 50Hz, 1500W

230Vac, 1500 Watt Dusk/Dawn Effect Lighting Controller Module will progressively adjust lighting brightness over a user set time period to mimic either Sunrise>Day (Day Effect) or Sunset>Night (Night Effect)...

£22.52 +VAT, £27.02 Inc
In Stock (UK Warehouse)
Cebek R-15 (CR015) - 2 Output Cyclical Night/Day Lighting Controller (230Vac 50Hz, 500W

230Vac 2-Output Cyclical Night/Day Lighting Controller provides a continuous virtual day effect (Dawn-Day-Dusk-Night) for use in a variety of applications including hydroponics', poultry farming, nativity models, etc...

£38.10 +VAT, £45.72 Inc
In Stock (UK Warehouse)
Cebek R-46 (CR046) - 4 Output Cyclical Night/Day Lighting Controller (12Vdc, 4A)

Repeating virtual-day simulation effect (Dawn-Day-Dusk-Night). Each output can be used to power a different lighting circuit. Flexibility for producing virtual day and night scenes in models, etc...

£55.41 +VAT, £66.49 Inc
In Stock (UK Warehouse)
Cebek R-111 (CR111) - Virtual Day Lighting Simulator Module, 230Vac 50Hz, 750W

The Virtual Day Lighting Simulator Module (230Vac 50Hz, 750W) is a flexible controller that provides a Dawn-Day-Dusk-Night lighting effect for use in a variety of applications...

£25.36 +VAT, £30.43 Inc
In Stock (UK Warehouse)
Quasar Electronics Limited
Your Cart
Your Cart: Empty
Search
Categories
© 2017 Quasar Electronics Limited, all rights reserved worldwide.
Exec Time: 0.038958 Seconds Memory Usage: 4.129883 Megabytes