The 2-Output Cyclical Night/Day Lighting Controller provides a continuous virtual-day effect (Dawn-Day-Dusk-Night) for use in a variety of applications including hydroponics', poultry farming, nativity models, etc.
The length of time for the daybreak/nightfall cycles is user adjustable between 1 Second and 120 Minutes thus providing a gradual transition in lighting intensity.
The duration of the Day/Night cycles is also user adjustable between 1 Second and 120 Minutes.
The PRIMARY OUTPUT can power up to 500W of incandescent light bulbs and provides a virtual day simulation that continuously repeats whilst the module is powered. The shortest duration one "day" can be set to is 4 seconds and the longest day duration possible is 8 hours.
A further AUXILIARY OUTPUT is supplied that can be set to activate during either the Day or Night part of the cycle. This can be used to power a secondary lighting circuit up to 500W.
The following adjustments/controls are available to the user:
The module is supplied fully assembled and has an onboard safety fuse. All you need to do is house it in a suitable enclosure, add the wiring, output fuses and lights.
Suitable for use with conventional incandescent filament light bulbs only. NOT SUITABLE for use with inductive loads or other types of bulbs e.g. fluorescent, CFL, halogen, transformer, etc.Features
|Operating Voltage||230Vac 50Hz mains (the interference filter mentioned in the User Manual is optional and is not necessary in most installations)|
|Maximum Load (per output)||500 Watts|
|Minimum Load (per output)||50 Watts|
|Ramp Time Adjustment||1-120 Seconds or 1-120 Minutes|
|Solid Time Adjustment||1-120 Seconds or 1-120 Minutes|
|Dimensions||101 x 77 x 25 mm|
|Product Format||PRE-ASSEMBLED Electronic Module Product Format Info|
|WARNING||Product operates at mains voltage and is not suitable for children. An isolating enclosure is required (not included). Installation, testing and commissioning should be performed by a competent person. Mains Electricity Info|
230Vac, 750W Dusk/Dawn Effect Lighting Controller Module will progressively adjust lighting brightness over a user set time period to mimic either sunrise/day (Day Effect) or sunset/night (Night Effect)...
230Vac, 1500 Watt Dusk/Dawn Effect Lighting Controller Module will progressively adjust lighting brightness over a user set time period to mimic either Sunrise>Day (Day Effect) or Sunset>Night (Night Effect)...
230Vac, 4 output cyclical Day/Night lighting controller providing a repeating virtual-day simulation effect (Sunrise-Day-Sunset-Night) with user adjustable times. Each output is active at different parts of the virtual day and rated for loads of up to 500 Watts...
Repeating virtual-day effect (Sunrise-Day-Sunset-Night) output. User adjustable times. Secondary output activates during Day or Night phase only. For LED strips / incandescent bulbs up to 4 Amps...
The Virtual Day Lighting Simulator Module (230Vac 50Hz, 750W) is a flexible controller that provides a Dawn-Day-Dusk-Night lighting effect for use in a variety of applications...