The Cebek PM-4 is a 10K Ohm input impedance general purpose preamp module suitable for a wide range of applications. It provides a line level output signal and has an on-board potentiometer for gain adjustment.
It comes from our family of mono audio preamp modules that are based around the popular TL071 Low-Noise JFET-Input General-Purpose Operational Amplifier IC and operate on 6-18V dc power supply.
Other modules in the range are:
Can be used with Cebek PM-5 - Mono Pre-Amplifier Module with Tone Controls.
Supplied fully assembled and tested with instructions so you only need to make the necessary connections.
SpecificationsSupply Voltage | 6-18V dc (e.g. CFE103 or CFE002) |
Current Consumption | 2mA min. - 10mA max. |
Input Impedance | 10K Ohms |
Signal Input | 5mV min. - 300mV max. |
Output Signal | 2V max. |
Output Impedance | 1K Ohm |
S/N Ratio | 80 dB |
Frequency Response | 30Hz - 17KHz |
Distortion | 0.05% max. |
Dims. (WxDxH) | 50 x 35 x 20 mm |
Connectors | Blade connectors / solder tags |
Enclosure | WCAH2855 |
Product Format | PRE-ASSEMBLED Electronic Module Product Format Info |