ITEM OBSOLETE - Replaced by CLS04
The Cebek L-10 module provides a simple but effective 4-Channel light chaser board. The L-10 uses transistors to switch the four 12Vdc, 2A outputs on in sequence. Step interval time is adjustable between 0.5 and 15 seconds.
Each channel has an onboard LED to indicate when it is active. All inputs and outputs have reverse polarity protection.
This module is designed for use with conventional mains tungsten (incandescent and halogen) filament light bulbs only. It is NOT suitable for use with LED, fluorescent, CFL, halogen with transformer, neon, low energy bulbs, etc. or any other type of inductive load like transformers, motors, etc.
Specifications| Operating Voltage | 12Vdc |
| Current Consumption | 10 - 15mA (control circuit only) |
| Suitable Power Supply | CFE011 |
| Output Load (per channel) | 2 Amps Max. |
| Output Voltage | 12Vdc |
| Sequence Interval | Minimum: 0.5 Seconds Maximum: 15 Seconds |
| Board Connections | Screw terminal blocks |
| Dimensions (WxDxH) | ~ 100 x 52 x 25mm |
| Enclosure | WCAH2851 |
| Weight | 64g |
| Product Format | PRE-ASSEMBLED Electronic Module Product Format Info |
