This audio frequency switched relay board will activate the onboard relay when the module detects the user-set input frequency from 2 KHz -15 KHz.
The trigger frequency can be adjusted from 2 KHz -15 KHz using the onboard trimmer. The input voltage range is 100mV to 3V peak to peak.
The oscillator is very stable and has a maximum detection frquency deviation of just ±150 Hz when used with a high quality stable power supply. Switch mode supplies are not recommended.
An LED indicates that the relay is in operation. The board is reverse polarity protected. Screw terminal blocks for all connections.Specifications
|Operating Voltage||12Vdc, 75mA max (e.g. )|
|Operating Current||10mA min - 75mA max|
|Suitable PSU||CFE002 or CFE103|
|Trigger Frequency Range||2 KHz - 15 KHz|
|Detection Frequency Deviation||±150Hz maximum|
|Input Voltage Range||100 mV - 3V p-p|
|Output||1 x SPDT Relay|
|Up to 240Vac or 28Vdc @ 3 Amps max. (Relay Datasheet)|
|Relay Connections||NO, NC, C (Relay FAQ)|
|Dimensions (WxDxH)||70 x 45 x 30 mm|
|Product Format||PRE-ASSEMBLED Electronic Module Product Format Info|
Multipurpose black ABS plastic enclosure approx. 130 x 68 x 44mm that can be used to house a number of suitable size kits and modules...
Nominal 12Vdc, 130 mA stabilised power supply module complete with an onboard 230Vac mains transformer. The module provides a stabilised, adjustable (10-15V) output with short circuit protection, onboard fuse, LED 'On' indicator and screw terminal blocks ...
This audio frequency switched relay board will activate the onboard relay when the module detects the user-set input frequency from 150Hz to 2KHz...
Audio Signal Controlled Relay Switch Module. This non-latching relay switch will switch the relay on in response to an audio input signal...