Cebek
230Vac automatic mains light switch with triac output capable of driving resistive loads up to 250W. The output is activated when the light level falling on the onboard detector drops below a user set threshold. The output is deactivated when the light le...
Electronics > Circuit Components > Printed Circuit Boards > Development Boards
cebek_i_41
I-41
6.20
Quasar Electronics Limited
https://quasarelectronics.co.uk/Item/cebek-i-41-photocell-lighting-controller-module-230vac-250w
230Vac automatic mains light switch with triac output capable of driving resistive loads up to 250W.
The output is activated when the light level falling on the onboard detector drops below a user set threshold. The output is deactivated when the light level increases again.
Applications: Automatically turn on electric lights or other resistive loads when ambient light falls below a preset level.
Features| Minimum detection level | 25 Lux |
| Maximum detection level | 130 Lux |
| Operating Voltage | 230Vac, 50Hz mains |
| Power Consumption (Max) | ~ 3 Watts |
| Output Load | Resistive loads only |
| Output Load (Minimum) | 50 Watts |
| Output Load (Maximum) | 250 Watts |
| Dimensions (WxDxH) | 30 x 30 x 30mm |
| Board Connections | Screw terminal blocks |
| Product Format | PRE-ASSEMBLED Electronic Module Product Format Info |
| WARNING | Product operates at mains voltage and is not suitable for children. An isolating enclosure is required (not included). Installation, testing and commissioning should be performed by a competent person. Mains Electricity Info |
This simple and inexpensive automatic switch can be used to turn on a mains bulb when the ambient light level falls below a certain level and off again as soon as there is adequate light available...
