2 to 45 minute DOUBLE delay timer modules with a mains rated relay output. When activated, the 1st user-set delay time will commence but the relay remains off. On completion, the relay turns on for the duration of the 2nd user-set delay time and then turns off.
Timer is activated via the Start Input (using for example a push button or relay contact closure). The timing sequence is non-retriggerable and will be completed regardless of further trigger signals or if the contacts remain closed after activation. Once finished, a fresh trigger signal is needed to start a new timing period.
An optional INSTANT-ON mode disables the trigger input. In this mode, the the relay turns on and the delay countdown commences immediately power is applied to the board. The relay turns off when the user-set time period has elapsed. Power must be removed and reapplied for a fresh countdown to commence. Instant-On mode is set using a header jumper not included (Order Code JUMPER-RED).
Both delay periods are independently adjustable from 2 to 45 minutes using the onboard potentiometers (header pins allow the use of user-supplied external potentiometers if required).
An LED indicates that the timer is in operation. The boards have reverse polarity protection.
A 0.1 second to 4 minute version of this board is available (Order Code CI033)
SpecificationsSupply Voltage | 12V dc |
Power Supply Options | Power Supply Module: CFE103 or UK Plug Power Supply: 660.446UK with connector 777.001UK |
Current | 15 mA min - 70 mA Max |
Output | 1 x SPDT Relay |
Maximum Output Load (Resistive) | Up to 240Vac or 28Vdc @ 5 Amps max. (Relay Datasheet) |
Relay Connections | NO, NC, C (Relay FAQ) |
Dimensions (mm) | ~ 44W x 76L x 30H |
Enclosure | WCAH2853 |
Board Connections | Screw terminal blocks |
Product Format | PRE-ASSEMBLED Electronic Module Product Format Info |