Cebek
12Vdc powered 1 - 180 Sec DOUBLE delay timer module. 5 Amp mains rated relay active for 2nd time period. Both delay periods independently adjustable...
Electronics > Circuit Components > Printed Circuit Boards > Development Boards
cebek_i_33
I-33
13.99
Quasar Electronics Limited
https://quasarelectronics.co.uk/Item/cebek-i-33-12vdc-double-delay-timer-relay-modules-1-180-second
1 to 180 second DOUBLE delay timer module with a mains rated relay output. When activated, the 1st user-set delay time will commence but the relay remains off. On completion, the relay turns on for the duration of the 2nd user-set delay time and then turns off.
Timer is activated via the Start Input (using for example a push button or relay contact closure). The timing sequence is non-retriggerable and will be completed regardless of further trigger signals or if the contacts remain closed after activation. Once finished, a fresh trigger signal is needed to start a new timing period.
An optional "Instant-On" mode disables the trigger input and commences the delay countdowns immediately power is applied. Power must be removed and reapplied for a fresh countdown to commence.
Both delay periods are independently adjustable from 1 to 180 seconds using the onboard potentiometers (header pins allow the use of user-supplied external potentiometers if required).
An LED indicates that the timer is in operation. The boards have reverse polarity protection.
A 2 to 45 minute version of this board is available (Order Code CI034)
Specifications| Operating voltage | 12Vdc e.g. Order Code 660.446UK with connector 778.106 |
| Current | 15 mA min - 70 mA Max |
| Output | 1 x SPDT Relay |
| Maximum Output Load (Resistive) | Up to 240Vac or 28Vdc @ 5 Amps max. (Relay Datasheet) |
| Relay Connections | NO, NC, C (Relay FAQ) |
| Dimensions (mm) | ~ 44W x 76L x 30H |
| Enclosure | WCAH2853 |
| Board Connections | Screw terminal blocks |
| Product Format | PRE-ASSEMBLED Electronic Module Product Format Info |
High quality Erp Compliant energy efficient fixed 12V regulated 1000mA max...
Multipurpose black ABS plastic enclosure approx. 130 x 68 x 44mm that can be used to house a number of suitable size kits and modules...
Highly versatile uC based HIGH POWER Multi-Mode Timer featuring seven different timing operations including 4 Instant On modes, 2 Delayed On modes and a toggling (cyclical) mode. Crystal controlled for accuracy. Opto-isolated Trigger input. 13 Amp mains rated relay...
Adjustable 12Vdc ON-OFF cyclic timer modules with relay output allowing switching of any load up to 230Vac, 5A. Ideal for use in automation circuits, flashing or traffic lights, models, outdoor / indoor (hydroponics) crop growing, etc...
Non-retriggerable 12Vdc powered 2 to 45 minute delay timer module with a mains rated relay output. When activated the relay turns on for the user-set delay period...
Precision non-retriggerable 12Vdc delay timer module with a mains rated relay output. The relay will stay on until the time period has elapsed. The time delay is fully adjustable from 0.1 - 10 seconds using two banks of on-board DIP switches...
12Vdc powered 1 to 180 Second re-triggerable delay timer module. 5 Amp mains rated SPDT relay output. Push button contact closure activation...
2-channel sequential delay timer relay module with independently settable delay periods from 1-180 seconds. Daisy chain multiple units...
12Vdc powered 2 - 45 Min. DOUBLE delay timer module. 5 Amp mains rated relay active for 2nd time period. Both delay periods independently adjustable...
12Vdc powered 1 to 180 Second DELAYED-ON timer module. Timing starts on power-up. 5 Amp mains rated relay activates when user-set delay period ends...
