12Vdc powered, 2 to 45 minute retriggerable delay timer board module with a 7A mains rated relay output.
The timer is triggered by closing the Start Input (using for example a volt-free push button or relay contact closure).
When triggered, the relay turns on for the user-set delay time and then turns off at timeout (irrespective of the Start input being open or still closed). The Start Input must go open circuit and be closed again to register a new trigger input.
If a new trigger input is received while the relay is active, the full delay time is restored (non-cumulative) without interrupting the relay. When no new trigger input is received for the entire duration of the set delay time and timeout is reached, the relay will turn off and the board resets ready for a new trigger signal.
The delay period is adjustable from 2 to 45 minutes using the onboard potentiometers (header pins allow the use of user-supplied external potentiometers if required).
An LED indicates that the relay is active. The board is reverse polarity protected.
SpecificationsSupply Voltage | 12V dc |
Power Supply Options | Power Supply Module: CFE103 or UK Plug Power Supply: 660.446UK with connector 777.001UK |
Current Consumption | 50mA |
Output | 1 x SPDT Relay |
Maximum Output Load (Resistive) | Up to 240Vac or 28Vdc @ 5 Amps max. (Relay Datasheet) |
Relay Connections | NO, NC, C (Relay FAQ) |
Dimensions (WxDxH) | ~ 30 x 76 x 43 mm |
Enclosure | WCAH2853 |
Product Format | PRE-ASSEMBLED Electronic Module Product Format Info |