Cebek
12Vdc powered 30 minutes to 4 hour delay timer module with a mains rated relay output. When activated the relay turns on for the user-set delay period...
Electronics > Circuit Components > Printed Circuit Boards > Development Boards
cebek_i_3
I-3
13.01
Quasar Electronics Limited
https://quasarelectronics.co.uk/Item/cebek-i-3-12vdc-delay-timer-relay-module-30-min-4-hour
12Vdc powered 30 minutes to 4 hour delay timer module with a mains rated relay output. When activated the relay turns on for the user-set delay period.
Timer is activated via the Start Input (using for example a push button or relay contact closure). The timing sequence is non-retriggerable and will be completed regardless of further trigger signals or if the contacts remain closed after activation. Once finished, a fresh trigger signal is needed to start a new timing period.
An optional "Instant-On" mode disables the trigger input so that the delay countdown will commence immediately power is applied to the board . The relay will stay on until the user-set time period has elapsed. The power must be removed and reapplied for a fresh countdown to commence.
The delay period is adjustable from 30 minutes to 4 hours using the onboard potentiometers (header pins allow the use of user-supplied external potentiometers if required).
An LED indicates that the timer is in operation. The board is reverse polarity protected.
A mains powered version of this board is available (Order Code CI103)
Specifications| Operating Voltage | 12V (e.g. Order Code 660.446UK with connector 778.106 or CFE103 module) |
| Current Consumption | 50mA |
| Output | 1 x SPDT Relay |
| Maximum Output Load (Resistive) | Up to 240Vac or 28Vdc @ 5 Amps max. (Relay Datasheet) |
| Relay Connections | NO, NC, C (Relay FAQ) |
| Dimensions (WxDxH) | 30x75x43mm |
| Enclosure | WCAH2853 |
| Product Format | PRE-ASSEMBLED Electronic Module Product Format Info |
High quality Erp Compliant energy efficient fixed 12V regulated 1000mA max...
VM141 Start/Stop Delay Timer Module can be used in a wide range of applications where a device needs to be activated for a user adjustable time period between 1 Second and 60 hours...
Multipurpose black ABS plastic enclosure approx. 130 x 68 x 44mm that can be used to house a number of suitable size kits and modules...
Highly versatile uC based HIGH POWER Multi-Mode Timer featuring seven different timing operations including 4 Instant On modes, 2 Delayed On modes and a toggling (cyclical) mode. Crystal controlled for accuracy. Opto-isolated Trigger input. 13 Amp mains rated relay...
Nominal 12Vdc, 130 mA stabilised power supply module complete with an onboard 230Vac mains transformer. The module provides a stabilised, adjustable (10-15V) output with short circuit protection, onboard fuse, LED 'On' indicator and screw terminal blocks ...
Adjustable 12Vdc ON-OFF cyclic timer modules with relay output allowing switching of any load up to 230Vac, 5A. Ideal for use in automation circuits, flashing or traffic lights, models, outdoor / indoor (hydroponics) crop growing, etc...
Non-retriggerable 12Vdc powered 2 to 45 minute delay timer module with a mains rated relay output. When activated the relay turns on for the user-set delay period...
Non-retriggerable 12Vdc precision delay timer module with a mains rated relay output. The relay will stay on until the time period has elapsed. The time delay is fully adjustable from 1 - 99 seconds using two banks of on-board DIP switches...
12Vdc powered 1 to 180 Second re-triggerable delay timer module. 5 Amp mains rated SPDT relay output. Push button contact closure activation...
2-channel sequential delay timer relay module with independently settable delay periods from 2 to 45 minutes. Daisy chain multiple units…
