This pre-assembled module plugs into a mobile phone and provides 8 independently controllable mains rated relay outputs. You can then call the mobile from anywhere in the world using any DTMF (tone dialling) landline phone or mobile phone and remotely control the relays as desired.Applications
It connects to the phones headphone jack socket. The mobile must be set to automatically answer incoming calls in handsfree mode (please check the phone has these features). Call forwarding and messaging must be turned off.
Each relay output can be setup to operate as momentary, toggling or timed (up to 99 minutes 59 seconds). Each relay is rated to switch 230Vac mains voltage up to 3A each.
Programming is performed using the remote phone keypad. The board is password protected so only authorised users can operate it
A 3.5mm jack plug connection lead is supplied.
Module has protection against inverse polarity and a screw terminal block for connections.Specifications
|Operating Voltage||12Vdc (12V dc nominal e.g. Order Code 660.446UK with connector 778.106 or CFE123 module)|
|Current Consumption||440mA max.|
|Output||8 x SPDT Relay|
|Up to 230Vac or 28Vdc @ 3 Amps max. (Relay Datasheet)|
|Relay Connections||NO, NC, C (Relay FAQ))|
|Board Connections||Screw terminal blocks|
|Dimensions (WxDxH)||144 x72 x 27 mm|
|Product Format||PRE-ASSEMBLED Electronic Module Product Format Info|
MK160 Remote Control Via GSM Mobile Phone kit is a useful little board that will enable you to turn equipment ON and OFF from any location with mobile phone coverage...
The CI207.2 is a 2 channel remote control relay board for mobile phones. Each relay output can be setup to operate as momentary, toggling or timed (up to 99 minutes 59 seconds...
4 relay outputs rated up to 230Vac, 28Vdc at 3 Amp max. Independently settable to operate as momentary, toggling or timed up to 99 Minutes 59 Seconds...