Mains powered 1 to 180 second retriggerable delay timer module with a mains rated relay output.
With power applied to the board, the timer is activated using the Start Input (using for example a volt-free push button or relay contact closure).
On activation, the relay turns on for the user-set delay time. Any further triggers received while the relay is active will restore the full delay time (non-cumulative) without interrupting the relay. If another trigger is not received before the delay timeout is reached, the relay will turn off and the board resets ready for a new trigger signal. The Start Input must go open circuit and be closed again to register a fresh trigger input.
The delay period is adjustable from 1 to 180 seconds using the onboard potentiometers (header pins allow the use of user-supplied external potentiometers if required).
An LED indicates that the timer is in operation.
SpecificationsOperating Voltage | 230Vac |
Output | 1 x SPDT Relay |
Maximum Output Load (Resistive) | Up to 240Vac or 28Vdc @ 5 Amps max. (Relay Datasheet) |
Relay Connections | NO, NC, C (Relay FAQ) |
Dimensions (WxDxH) | ~ 84 x 55 x 33 mm |
Enclosure | WCAH2853 |
Product Format | PRE-ASSEMBLED Electronic Module Product Format Info |
WARNING | Product operates at mains voltage and is not suitable for children. An isolating enclosure is required (not included). Installation, testing and commissioning should be performed by a competent person. Mains Electricity Info |