The Cebek DA-06 module allows you to load up to 5 credits on the chip-card. Ideal for tanning beds, pool/snooker table lights, etc.
When the user inserts the card into the DA-06 and presses the validation button, the module deducts 1 credit from the card and activates the relay output. The ON time can be set to last from 1 to 120 minutes. Once this time has elapsed, the output relay turns off. The user has to repeat the process to start a new cycle.
On-board controls allow the DA-06 to be configured to operate like a programmer and recorder, or like a reader and credit down counter.
Module has LEDs to indicate the credit status of the card. One virgin 1 Kbytes Cebek chip-card is included.
Specifications| Operating Voltage | 12Vdc |
| Current Consumption | 70mA |
| Suitable Power Supply | CFE002 |
| Output | 1 x SPDT Relay |
| Maximum Output Load (Resistive) | Up to 240Vac or 28Vdc @ 5 Amps max. (Relay Datasheet) |
| Relay Connections | NO, NC, C (Relay FAQ) |
| Board Connections | Screw terminal blocks |
| Dimensions (WxDxH) | ~ 122 x 65 x 30mm |
| Weight | 138g |
| Product Format | PRE-ASSEMBLED Electronic Module Product Format Info |
