The Cebek DA-01 module is a magnetic card reader for use in a door entry system. 5 pre-programmed magnetic swipe cards are included (the DA-01 can work with up to 99). Cards can be enabled or disabled as the system administrator requires.
The module is fitted with a buzzer that sounds when a card has been read and LEDs provide a visual indication of the cards access status. There is a mains rated relay output with an adjustable ON time.
The D-01 is supplied with one card reader and 5 magnetic swipe cards.Specifications
|Current Consumption||100mA max|
|Suitable Power Supply||CFE103|
|Output||1 x SPDT Relay|
|Up to 240Vac or 28Vdc @ 4 Amps max. (Relay Datasheet)|
|Relay Connections||NO, NC, C (Relay FAQ)|
|Board Connections||Screw terminal blocks|
|Dimensions (WxDxH)||Control Board: ~ 95 x 65 x 30mm|
Card Reader: ~ 100 x 44 x 36mm
|Product Format||PRE-ASSEMBLED Electronic Module Product Format Info|
Keypad controlled electronic lock. Program up to 10 4-digit PIN codes. PIN code enable-disable. Buzzer / LED indicators. Relay output. Adjustable ON time...
Melody activated access controller for door bell and solenoid lock. Access granted only when correct melody is played on bell push. Records personalised melody. Relay output. Adjustable ON time. Auto-blocking...
Load up to 5 credits on card. Each time user validates card in reader, 1 credit is deducted and relay activates. Adjustable ON time of 1 to 120 minutes....
Load up to 120 credits on card. Time per credit adjustable 1 to 120 seconds. Relay activates when valid card inserted in reader. Credits deducted incrementally until card removed or credits used up...
Nominal 12Vdc, 130 mA stabilised power supply module complete with an onboard 230Vac mains transformer. The module provides a stabilised, adjustable (10-15V) output with short circuit protection, onboard fuse, LED 'On' indicator and screw terminal blocks ...