The Cebek CD-6.1 module is a 6-digit UP / DOWN counter with Preset function and relay output. The display board has 25mm high digits. Preset allows you to set a number in count UP mode. Once this number is reached the relay activates and the count stops (ideal for process control automation.
The counter starts at zero and increases by one digit (up to a maximum of 999,999) each time a count impulse is received. It can also count down, subtracting from the count.
Control Inputs - accept simple voltage free make contact closure (e.g. a push button, relay closure) or injection of an external negative going pulse (5Vdc). The 5 control inputs are:
Programmable Modes - the board can be programmed to operate as follows:
The counter always stops when the count equals the Preset value (or zero depending on mode set). Reset or Next must be used to continue.
The counter comprises a control board and separate display board connected by a 20cm ribbon cable to allow versatile mounting options.
Also available with a 13mm high digit display (Order Code CCD006)
SpecificationsOperating Voltage | 12 or 24Vdc |
Current Consumption | 250mA |
Suitable Power Supply | CFE123 |
Output | 1 x SPDT Relay |
Maximum Output Load (Resistive) | Up to 240Vac or 28Vdc @ 5 Amps max. (Relay Datasheet) |
Relay Connections | NO, NC, C (Relay FAQ) |
Display | 6-Digit, 7-Segment |
Digit Height | 25mm (1" |
Range | 0 - 999999 |
Board Connections | Screw terminal blocks |
Control Board Dimensions (WxDxH) | ~ 100 x 42 x 30mm |
Display Board Dimensions (WxDxH) | ~ 123 x 54 x 12 mm (excluding bezel mask and screws) |
Interconnection Cable Length | ~ 200 mm |
Weight | 222g |
Product Format | PRE-ASSEMBLED Electronic Module Product Format Info |