The Cebek CD-54 is an extra large 300mm high single digit, 7 digit display composed of 262 x 5mm superbright red LED's providing glare-free visibility for outdoor applications or large interior spaces.
It can display all of the digits between 0 and 9 plus hour bridges that you can configure as hours or a decimal point.
It can be driven with a multiplexed or standard input signal used for a 7-segment LED display. This makes it possible to replace a small display with a giant one.Specifications
|Current Consumption||410mA maximum|
|Suitable Power Supply||CFE024|
|Display||262 x 5mmØ LED's|
|LED Output||3,000 mcd|
|Digit Height||300mm (12")|
|Range||0 - 9|
|Board Connections||Screw terminal blocks|
|Dimensions (WxDxH)||~ 290 x 194 x 15mm|
|Product Format||PRE-ASSEMBLED Electronic Module Product Format Info|
|Cebek CD-25 (CCD025)||Digital Clock/Thermometer Driver Module (Multiplexed 4-Digit Output)|
|Cebek CD-26 (CCD026)||Digital Clock/Date/Thermometer Driver (Multiplexed 4-Digit Output)|
Digital Clock and Thermometer module with a 4 digit multiplexed output to drive 7-segment digital display modules. It outputs Hour and Minute signals in a 24 Hour format and/or temperature in Centigrade or Fahrenheit...
Digital Clock, Date and Thermometer module with a 4 digit multiplexed output to drive 7-segment LED display modules. It outputs Hour and Minute signals in a 24 Hour format and/or temperature in Centigrade or Fahrenheit...
58mm high, 4-digit, 7-segment LED display board that can display the digits from 0 to 9. Drive with a TTL or CMOS multiplexed or standard input signal used for a common anode 7-segment LED display...
Large 150mm display composed of 73 x 5mm superbright red LED's. Ideal where greater visibility is required. Can display the digits between 0 and 9. Drive with a multiplexed or standard 7-segment LED display signal. Recommended for outdoor applications or large interior spaces...
Power supply module with variable output voltage from 12 - 24Vdc, 2 Amp complete with a 230Vac mains chassis transformer. The voltage is adjusted using the board mounted trimmer...