The Cebek CD-46 module is a whole number up counter with Preset and relay output. It has no output display. The count input accepts negative-going clock pulses or volt-free contact closure.
A Preset number between 1 and 999 can be selected using on-board switches. The relay output will activate each time the input pulse number matches the preset number.
The output relay will remain on until the next pulse is received. This process is automatically reset, or you manually reset.
Count input accepts a simple make contact closure (e.g. a push button, relay closure) or a negative going clock pulse (5Vdc). The board also has a Reset input to zero the count and display.
The module has an LED to indicate when an input pulse is received but no digital display.Specifications
|Suitable Power Supply||CFE103|
|Count / Preset Range||1 -999|
|Count Input||Negative-going clock pulse|
|Counting Frequency||100 Hz Maximum|
|Output||1 x SPDT Relay|
|Up to 240Vac or 28Vdc @ 5 Amps max. (Relay Datasheet)|
|Relay Connections||NO, NC, C (Relay FAQ)|
|Board Connections||Screw terminal blocks|
|Dimensions (WxDxH)||~ 92 x 59 x 30mm|
|Product Format||PRE-ASSEMBLED Electronic Module Product Format Info|
Low cost 3 digit LED event counter kit. Suitable for a wide variety of event counting applications...
3-digit standard UP counter with reset and LED display. The counter starts at zero and increases by one digit (up to a maximum of 999) each time a count impulse is received....
3-digit UP / DOWN counter with Reset and various height LED display options. Counts up from zero, increasing by one digit (to a maximum of 999) each time a count input is received. It can also count down, subtracting from the count...
Nominal 12Vdc, 130 mA stabilised power supply module complete with an onboard 230Vac mains transformer. The module provides a stabilised, adjustable (10-15V) output with short circuit protection, onboard fuse, LED 'On' indicator and screw terminal blocks ...