The Cebek CD-41 module is a 4 digit, 7-segment LED display module with BCD inputs and can be connected to one of our of BCD output driver boards e.g. Up/Down Counter, Chronometer or Keyboard.
It decodes the BCD sent to each input by the control module and indicates the decimal number on the corresponding display. It accepts a multiplexed input, (Latch), decimal point selection and display-off function to minimise power consumption.
The CD-41 can be connected to CD-14, CD-16 and CD-17 modules (not included) either as a standalone display or as a mimic display in parallel with the Cebek large BCD LED display modules CD-10, CD-11, CD-28, CD-29 and CD-40.Specifications
|Suitable Power Supply||CFE103|
|Digit Height||13.5mm (0.5")|
|Board Connections||Screw terminal blocks|
|Dimensions (WxDxH)||Overall: ~ 102 x 105 x 60 mm|
|Product Format||PRE-ASSEMBLED Electronic Module Product Format Info|
|Cebek CD-14 (CCD014)||Up/Down Counter Driver Module with 4-Digit BCD Output|
|Cebek CD-16 (CCD016)||Chronometer Driver Module with 4-Digit BCD Output|
|Cebek CD-17 (CCD017)||Control Keyboard Module with 4-Digit BCD and Relay Output|
UP / DOWN counter module with 2 digit BCD output for driving two BCD digital display modules. The counter starts at zero and increases by one digit (up to a maximum of 99) each time a count impulse is received. It can also be set to count DOWN. Reset input to zero count...
UP / DOWN counter module with 4 digit BCD output to drive BCD digital display modules. The counter starts at zero and increases by one digit (up to a maximum of 9999) each time a count impulse is received. It can also be set to count DOWN. Reset input to zero count...
Digital clock driver module with a 4 digit BCD output to drive BCD digital display modules. It outputs Hour and Minute signals in a 24 Hour format...
0-99 minute or 0-99 hour chronometer with Preset and 4 digit BCD output for driving BCD digital display modules. Functions include Count Up/Down, Start/Stop, Reset and Next. Preset allows you to set a stop time. When reached the chronometer will stop and the on-board output relay is activated...
The Cebek CD-17 module is a control keypad with BCD output for use with Cebek BCD digital display modules. Numbers of up to 4 digits entered on the keyboard can be displayed on a BCD display...
Nominal 12Vdc, 130 mA stabilised power supply module complete with an onboard 230Vac mains transformer. The module provides a stabilised, adjustable (10-15V) output with short circuit protection, onboard fuse, LED 'On' indicator and screw terminal blocks ...