Remote control 12-channel infrared receiver relay board containing 12 independently controllable relays and a fully assembled hand held IR remote control (RC) unit with a range of up to 20 metres indoors.Features
Each relay can be turned on or off independently. The receiver board has two banks of 6 relays. These are broken into two groups comprising 8 relays in Group 1 and 4 relays in Group 2. Each group can be set to either Toggle or Momentary action using onboard slide switches. Remote control buttons 13 and 14 are used to turn off all the relays in a group. Accepts single button presses (multiple button presses are ignored). See User Manual below for detailed information.
Each relay is rated to carry up to 240Vac or 28Vdc @ 5 Amps maximum current and have screw terminal block connectors. Receiver unit is built on a high quality DSPTH PCB.
Recommended for use indoors. Use an RF Remote Control System indoors or outdoors.Specifications
|Relay Board Receiver|
|Power||Regulated 12Vdc (Order Code 660.446UK is suitable)|
|Current Consumption||400mA max (40mA standby plus 30mA per active relay)|
|Output Type||12 x SPDT Relays|
|Up to 240Vac or 28Vdc @ 5 Amps max. per relay (Relay Datasheet)|
|Output Connections||NO, NC, C (Relay FAQ)|
|Dimensions (mm)||~ 112L x 122W x 25H|
|Fixing Holes||4 x M3|
|Board Connections||Power: 5.5 x 2.5mm DC socket|
Relays: Screw terminal blocks
|IR Code Protocols||Holtek HT6221/HT6222 Encoders (Table 4, Page 7, Key Codes K1 K2 K5-7 K9-11 K13-15 K21-23)|
|Remote Control Unit|
|Power||2 x AAA batteries (Order Code 656.013)|
|Range||20 metres (indoors)|
|Dimensions (mm)||~ 130L x 50W x 25H|
|Product Formats||SELF-ASSEMBLY Electronic Kit (KT) or|
PRE-ASSEMBLED Electronic Module (AS) Product Formats Info
This kit allows you to turn on and off a variety of electrical devices using almost any household infrared remote control unit (e.g. TV, video, satellite, hi-fi, etc)...
Each button press on the remote produces a momentary (i.e. only active whilst key is pressed) corresponding active low signal on one of 14 output pins of the decoder IC (normal state is high)...
8 channel infra-red relay receiver board. The relay outputs can be set to operate in Momentary, Latching or Timed mode (from 0.1 - 120 seconds). The TL-73 module is compatible with the TL-71 IR transmitter. The board has a reset function. Each output has an LED status indicator...
14 button handheld IR Remote Control Unit (as supplied with kits 3092 and 3142)...