Easy-to-use, low cost yet powerful programmer for the ATMEL 8051 family of microcontrollers. It will Program, Read and Verify Code Data, Write Lock Bits, Erase and Blank Check. All fuse and lock bits are programmable.
This programmer has intelligent onboard firmware and connects to the serial port. It can be used with ANY type of computer and requires no special software. All that is needed is a terminal/communications program which all computers have. 5 LED's are used to indicate programmer status.Supported Devices
This programmer can be used to burn the following ATMEL microcontrollers:
89C1051, 89C2051 and 89C4051, 89C51, 89LV51,89C52, 89LV52, 89C55, 89LV55, 89S8252, 89LS8252, 89S53, 89LS53, 87F51, 87F52 (otp)
NB If a device is not specifically listed above it is not supported by this programmer e.g. 89C55WD & 89S8253 are NOT supportedSoftware
No special software interface is required. All you need is a comms program that allows you to control the programmer using the serial port of any computer running any operating system. Any terminal emulator program can be used. For Window 10, 8 or 7 you can download the new version of HyperTerminal (Terminal or HyperTerminal is pre-installed in pre-Windows 7 machines). Or use our free Terminal program (32-bit OS only).
Power Supply: 16Vdc (Order Code 661.130UK)