This product is obsolete/discontinued and no further stocks are available. Please see alternatives in the category links above.
Make your your own simple disco lights that pulsate to the music's beat. The kit uses an audio input to modulate the intensity of one or more lights.
This circuit uses a safe, modern MOC3021 opto-coupler and triac based design. This completely isolates the mains voltage lighting circuit from the low voltage amplifier section.
Resistors supplied for 230Vac or 110Vac operation.
The outputs are designed for use with conventional incandescent filament light bulbs only.
NOT suitable for use with inductive loads or other types of bulbs e.g. fluorescent, CFL, halogen, transformer, etc.Specifications
|Input trigger voltage||2.3 - 2.5V (min)|
|AC input voltage||230Vac or 110Vac mains|
|Load (max)||500 Watts @ 230Vac or 220 Watts @ 110Vac|
|Audio Input||3.5mm jack socket|
|Board Dimensions||54 x 45 x 25mm|
|Product Format||SELF-ASSEMBLY Electronic Kit (KT ) Product Formats Info|
|WARNING||Product operates at mains voltage and is not suitable for children. An isolating enclosure is required (not included). Installation, testing and commissioning should be performed by a competent person. Mains Electricity Info|
Multipurpose black ABS plastic enclosure approx. 130 x 68 x 44mm that can be used to house a number of suitable size kits and modules...
Offers very impressive light effects thanks to very good channel separation between the low, medium and high frequency signals. up to 1000 Watts per channel...
A stereo version of our kit 1006. It uses two optoisolators to link the modulators to the sound source thus separating the mains and amplifier voltages...